Control switches 3 button
1 inch and 22mm handlebar
Important notes
Control switches 3 button 1 inch and 22mm handlebar
motogadget mo.switch push button unit with 3 buttons:
The mo.switch is a high-quality, universal push button unit with an elegant, no-frills design, for 1-inch or 22 mm (7/8-inch) handlebar diameter. In combination with an electronic push button control device (not included - see "Pushbutton control"), these attractive, CNC-machined units are used to operate all electrical devices, e.g. lights, turn signals, electric starters, horns, and lots more. The casing is machined from billet aluminium and comes in a choice of mirror-polished or reflective black anodised finish. The casing is compact enough to install two or more units on a handlebar. Each unit is equipped with two buttons in black or stainless steel, which can be combined either to match or contrast with the casing. Two M5 stainless steel countersunk fastening screws secure the unit to any handlebar so that it will not move an inch. The size of the unit, combined with an ergonomic pressure point (light, mechanical detent) ensure a definite shift feel, even when operated with gloves. With this tactile feedback, you are immediately sure that you have operated the push button correctly without having to check each time.
Dimensions:
- Inside diameter: 22 mm or 1 inch (25.4 mm)
- Outside diameter: 49 mm
- Width: 20.5 mm
Versions:
- black/black: black casing/black buttons
- black/stainless steel: black casing/stainless steel buttons
- polished/black: polished casing/black buttons
- polished/stainless steel: polished casing/stainless steel buttons
Features:
- Each push button can be connected with either one or two cables
- Internal earth terminal ready for single-cable layout (everything required for connection is included)
- Push buttons available individually and can be replaced
- Compatible with all motogadget push button control devices
- Vibration- and splashproof (IP65)
Push button control device:
We recommend the motogadget mo.unit V.2 + cable kit for controlling the mo.switch push button units. Simpler still, and with only a single outgoing cable, is push button control via an mo.unit V.2 in combination with the motogadget mo.button (1-cable connection via BUS system, see "Compatible Products".
High Class Instruments & Accessories - MADE IN GERMANY
Anyone who is serious about customising cannot fail to appreciate the quality of motogadget products. In no time at all, the Berlin-based manufacturer has achieved virtually cult status with its high-class instruments. The reason is the exceptional functionality of motogadget products, but most importantly their extremely clean design, high-quality materials, top engineering and absolute reliability.
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
QUALITY MADE IN GERMANY!
By purchasing this item you have chosen a premium-quality product with superior German workmanship. This internationally acknowledged mark of quality means that this product is the result of efficiently coordinated development and production processes, technological expertise, continuous quality controls.
Stainless steel is a collective term for rustproof steel. It is much more resistant to corrosion than non-alloyed steels. Stainless steel does not deteriorate, and is hygienic, UV-resistant, non-corroding, fracture-proof, non-toxic and environmentally friendly. It does not weather and can be recycled in its entirety, even after many years. Technically, the term "stainless steel" refers to corrosion-resistant steel alloys with a wide variety of compositions but always containing a high percentage of chromium (usually a minimum of 10.5%)
.
MAINTENANCE:
Stainless steel should be cleaned regularly like all other materials, especially after exposure to salty air (near the coast), and also at regular intervals.
Water can easily collect in corners, edges and screw connections, resulting in corrosion. So careful cleaning is important, and if necessary screws should be undone in order to clean the parts thoroughly.
Do not leave rusty steel parts against stainless steel to avoid the rust "contamination".
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?