KERN-STABI FRONT LIFTER

Kern-Stabi has developed the *X4 2049* front kickstand to support you when changing the front wheel or fork tubes. Extremely robust and stable, made of galvanized round or square tube in workshop quality. It makes lifting the front end of the motorcycle on the steering shaft from below child's play. The device is operated using a 13 mm socket and a ratchet. All components of the front fork are then freely movable in the air or completely relieved. The device is therefore universally suitable for two-wheelers up to a maximum of 275 kg and with an accessible steering stem (inner diameter min. 13 - 30 mm). A particular advantage of the Kern-Stabi front spindle stand *X4 2049* is that you do not need any free space in front of the two-wheeler to jack it up. This means you can park your bike with the front wheel right up against a wall and still lift it up at the front with the *X4 2049*. Ideal for cramped garage conditions. Also ideal for use on a lifting platform.

The usable working range (spindle length) is approx. 30 cm. This means you can jack up your motorcycle particularly high if required. The front spindle stand can be dismantled for space-saving storage and transportation.

• ​​​​​​​made of galvanized round or square steel tube in workshop quality
• Universally suitable for two-wheelers up to a maximum of 275 kg
• for vehicles with accessible steering shaft. Inner diameter: min. 13 - 30 mm
• Spindle length: 30 cm, therefore particularly high/comfortable working height possible
• including 2 cones, long: for deep-drawn fairings, short: uncovered
• no free space required in front of the two-wheeler, ideal for "garage parkers"
• Can be operated with a 13 mm socket and ratchet, low force required

Please note:
For stability reasons, this front jack should only be used in combination with a rear mounting stand! You can find jacks and adapters under "Matching items"

Scope of delivery:
1 x Kern-Stabi front kickstand *X4 2049*
1 x long cone
1 x cone short