LSL
LSL Clamp Fastening
For X-Bar Handlebar
Art. No. 10021404
Important notes
Find your bike:
RRP
€89.95 2
€69.95 1
You have placed the following items in the shopping basket:
Description
LSL Clamp Fastening For X-Bar Handlebar
Model-specific LSL Clamps for double-butted (diameter 28.6 mm) LSL X-Bar handlebars
These shapely clamps made of CNC-milled aluminium are suitable for many current naked bikes with the handlebar clamp screwed separately to the triple tree. Depending on the particular model, the position of the handlebar is set lower or higher than the original position - the clamps themselves are all 45 mm in height, measured from the centre of the clamp to the triple tree. The original attachment points are always used, and the rubber bearing, if present, is also retained. Includes fastening bolts and TÜV component test certificate valid for Germany. Sold in pairs.
Scope of delivery:
- Clamping blocks (KM45) 1 pair
- Screws M8x25 4 pieces
- Screws M10x1,25 2 pieces in the chosen length
- Washers M10 2 pieces
- Nuts M10x1,25 (self-locking) 2 pieces
- General operating permit (ABE)
Dimensions of the bolts supplied:
- 10021404 (Z 750 / 1000): M10 x 80, sleeve 12 x 38 mm
- 10021405 (GSF 1200 / FZ1 / BT 1100): M10 x 80
- 10021406 (Speed Triple, 1050i): M10 x 55, aluminium bushings
- 10021408 (XJR 1200 / 1300): M10 x 40
Note: Depending on how much the handlebar is raised, longer brake lines and/or throttle and clutch cables may have to be fitted on some motorbikes.
Manufacturer details: LSL
Design and function at the highest level
Anybody who looks at the LSL conversion projects can see straight away that the people work with a great deal of passion and at least equally as much technical expertise. It is true that LSL places enormous value on creating a great look for all of its products, but maximum biking pleasure through excellent performance is always central to every product development. LSL has made an extremely good name for itself in the field of ergonomic optimization (handlebars, grips, levers and footrests). LSL also specialises in chassis- and hydraulic components, crash protection and lighting. Several accolades testify to the fact that LSL has taken the right approach with its commitment to technical finesse and quality without compromise - such as the fact LSL has won the 2013 "PS" magazine readers choice award in the "accessories/conversions" category for the fifth consecutive time.
Info
The German "Allgemeine Betriebserlaubnis (ABE)" (general type approval) authorises the use of the relevant accessories on the vehicle models listed in the certificate booklet. The certificate booklet must be carried along when driving and must be presented on request in the event of a traffic control or the main inspection (HU).
Accessories with an ABE do not have to be registered in the vehicle documents. However, if you do not want to carry the certificate with you at all times, you can have it registered (at a charge) by the TÜV, for example.
If the accessories are to be used on a vehicle that is not listed in the ABE, an individual approval is necessary.
The regulations in other countries may differ. Before ordering a product, please make sure that it may be used in road traffic in your region, your country.
Info
QUALITY MADE IN GERMANY!
By purchasing this item you have chosen a premium-quality product with superior German workmanship. This internationally acknowledged mark of quality means that this product is the result of efficiently coordinated development and production processes, technological expertise, continuous quality controls.
Info
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
Documents
Reviews (5)
Write a review for LSL CLAMP FASTENING
Terms of use
We offer you the opportunity to rate products purchased from Louis and to share your experiences with them publicly.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Many thanks!
Your product rating has been saved. It will be displayed in a few minutes
Your previous input will be lost!
Do you really want to cancel your entry?
All versions
Any questions?
+400 brands
2-year right of return
Fast delivery
Worldwide shipping