MAGURA BRAKE FITMENT
HC3 - 18 MM PISTON
Important notes
New pressure lines are required. The conversion should be done by a professional workshop to ensure that the new lines are the correct length.
MAGURA BRAKE FITMENT HC3 - 18 MM PISTON
MAGURA RADICAL HC3. A beautifully engineered fitment, and the dream of many a high-end freak.
Radial pump, machined from the billet for fantastic braking feel. A real professional component for superbikes, supermotos and road sports bikes, which delivers an impressive combination of ergonomics and controllability. The space-saving and technically perfect design offers clear-cut advantages:
- Optimised lever transmission
- Direct pressure point for sensitive and powerful braking
The RADIAL HC3 is the first choice for motorcycle racers and professional tuners.
With the latest generation of radial master cylinders, MAGURA has improved brake control in impressive fashion. The patented and innovative MAGURA HCT (Hard Core Technology) provides the perfect answer to both the demands of professional racers and the comfort and safety expectations of touring bikers.
Reduced internal friction translates into significantly improved brake performance. Naturally, the HC3 brake fitment is entirely compatible with all brake systems - with or without ABS!
From the high-quality, machined aluminium housing down to the tiniest detail, the HC3 offers nothing but the best components and enhances any motorcycle.
Features
- Machined aluminium housing - This fitment is made of high-grade aluminium to give great stiffness combined with light weight.
- 90° radial design - Push-rod and cylinder sit at a 90° angle to the handlebar, which means lower transmission losses and a more direct brake feel for improved control.
- MAGURA HCT (Hard Core Technology) - This patented brake technology offers even better brake feel due to reduced friction. The special piston technology prevents damage in the event of ABS kickback.
- ABS compatibility - MAGURA HCT can be used with all ABS systems currently on the market. (as at spring 2014)
- Three-way adjustable lever ratio - The adjustable lever ratio with the HC3 master cylinder means that the lever support bolt can be repositioned to give a harder or softer pressure point, which mimics the effect of using a 1 mm larger or smaller piston diameter.
- Folding lever blade - Reduces the risk of damage in the event of an accident or if your bike falls over, so the brake will still operate normally.
- Advanced Seal Technology - This new technology reduces or prevents ingress of air into the hydraulic system in extreme conditions.
- Reservoir kit - The fitment comes with an external reservoir plus mounting bracket. The compact design means that installation on virtually any motorcycle should be possible. The smoked glass window enables you to check the fluid level at any time.
- Titanium fastening bolts - Wherever possible, MAGURA has used titanium if this would be advantageous. Titanium is lightweight and corrosion-resistant.
Manufacturer: Magura Bosch Parts & Serv. | Eckisstraße,Großer Forst 3,6 | 72574,72622 Bad Urach,Nürtingen | Germany | +49 7125 1234 000 | welcome@mbps.eu | www.mbps.eu
List of compatible motorcycles
Professional clutch and brake systems.
MAGURA Powersports delivers top performance for every biker and every situation. The German brand manufacturer develops all its products with the clear objective of continuously enhancing the technology. Far from being just stock products, MAGURA brake and clutch systems are specially developed as upgrades that guarantee more biking enjoyment, safety and comfort. Patented MAGURA technology is a hit with professional and leisure bikers alike. The MAGURA name stands for the best materials and components, great engineering and top quality down to the smallest detail.
Professional technical expertise is essential to fit this article. We therefore urge you to have it installed by a motorcycle workshop!
The German "Allgemeine Betriebserlaubnis (ABE)" (general type approval) authorises the use of the relevant accessories on the vehicle models listed in the certificate booklet. The certificate booklet must be carried along when driving and must be presented on request in the event of a traffic control or the main inspection (HU).
Accessories with an ABE do not have to be registered in the vehicle documents. However, if you do not want to carry the certificate with you at all times, you can have it registered (at a charge) by the TÜV, for example.
If the accessories are to be used on a vehicle that is not listed in the ABE, an individual approval is necessary.
The regulations in other countries may differ. Before ordering a product, please make sure that it may be used in road traffic in your region, your country.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?